BZPYJ - CHLOROFORM, 48603

  • MSDS: BZPYJ
  • Manufacturer: SUPELCO INC
  • Product Name: CHLOROFORM, 48603
  • National Stock Number: 6630-00N064230
Product Identification

Product ID:CHLOROFORM, 48603
MSDS Date:11/12/1993
FSC:6630
NIIN:00N064230
MSDS Number: BZPYJ

Responsible Party
SUPELCO INC
SUPELCO PARK
BELLEFONTE, PA 16823-0048
US

Emergency Phone: 814-359-3441

Info Phone: 814-359-3441

Cage: 54968

Contractor
SIGMA-ALDRICH INC.
14508 ST. LOUIS, MO 63103 US

Telephone: 314-771-5765/414-273-3850X5996

Cage: 54968

Ingredients

METHANOL (SARA 313) (CERCLA)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 99.98%

OSHA PEL S, 200 PPM

ACGIH TLV: S,200PPM/250STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CHLOROFORM; (METHANE, TRICHLORO-CHLOROFORM) (SARA 302/313)

CAS: 67-66-3

RTECS: FS9100000

Fraction By Weight: 0.02%

OSHA PEL C 50 PPM

ACGIH TLV: 10 PPM

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED. MAY BE FATAL IF
SWALLOWED. HEADACHE, NAUSEA, GASTROINTESTINAL DISTURBANCES,
BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH W/WATER FOR @ LST 15 MIN. CONT MD. SKIN:FLUSH W/LG
VOLS OF WATER. INHAL:IMMED MOVE TO FRESH AIR. IF BRTHG STOPS, GIVE
ARTF RESP. CONT MD. INGEST:NEVER GIVE ANYTHING BY MOUTH TO UNCON
PERSON . NEVER TRY TO MAKE UNCON PERSON VOMIT.GIVE 2 TABLESPOONS OF
BAKING SODA IN GLASS OF WATER. PRESS FINGER TO BACK OF TONGUE TO
INDUCE VOMIT. IMMED CONT MD.

Fire Fighting

Flash Point:50.0F,10.0C
Lower Limits:6.0%
Upper Limits:30%
Extinguishing Media:CO*2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Accidental Release

Spill Release Procedures:TAKE UP WITH ABSORBENT MATERIAL. VENTILATE
AREA. ELIMINATE ALL IGNITION SOURCES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN SEALED CONTAINER IN COOL, DRY
LOCATION. KEEP AWAY FROM OXIDIZERS. KEEP AWAY FROM IGNITION
SOURCES.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED FACE MASK WITH ORGANIC
VAPOR CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREAS.
Protective Gloves:WEAR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:0.790 G/ML (H*2O=1).

Chemical Properties

Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:-144F,-98C
Vapor Pres:100
Vapor Density:1.10
Spec Gravity:SUPP DATA
Evaporation Rate & Reference:>1 (ETHER=1)
Solubility in Water:100
Appearance and Odor:CLEAR, COLORLESS LIQUID.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, CHROMIC ANHYDRIDE, LEAD PERCHLORATE, PERCHLORIC
ACIDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NOT APPLICABLE.

Disposal

Waste Disposal Methods:COMPLY WITH ALL APPLICABLE FEDERAL, STATE OR
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.